CeramicSpeed T47-86 Bottom Bracket for Shimano
CeramicSpeed T47-86 Bottom Bracket for Shimano
CeramicSpeed T47-86 Bottom Bracket for Shimano
CeramicSpeed T47-86 Bottom Bracket for Shimano

CeramicSpeed T47-86 Bottom Bracket for Shimano

$599.99
/
Tax included. Shipping calculated at checkout.
Write a product review

T47 is a newer bottom bracket shell design, utilizing the oversized interface of PF30 and EVO386, but with the benefit and peace of mind of a threaded interface. This bottom bracket allows you to install Shimano and other 24mm diameter thru-axle cranks into a T47 shell.

It's compatible with 86mm wide frames, and also compatible with TREK T47 85.5mm wide frames.

CeramicSpeed Bearings come installed in cups and are connected through the shell. Our Gravel bottom brackets are built with CeramicSpeed Coated bearings and equipped with UFO Long Life Grease for the ultimate in durability and protection in all environments. The CeramicSpeed Coated Bearings have an additional attribute: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life.

CeramicSpeed's coating has several performance enhancing properties that makes it unique. The unique coating formula is a metallic layer that covers the bearing races and makes them 75% harder than steel. Thanks to this, they are highly resistant to corrosion and the coating provides an even lower friction than our standard bearings. Even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible if you choose the coated version.

  • Features
  • Included

T45 is an open standard designed to provide the benefits of both oversized shells and the tight fit of threading. These cups and bearings adapt the shell so it is compatible with 24mm diameter spindle cranks.

 

Our CeramicSpeed Standard Bearings reduce drag by 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.

 

The CeramicSpeed coated Bearings feature an even longer lifespan and even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.

 

Applied to the bearings at the factory is All Round Grease. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.

  • 2 threaded cups with CeramicSpeed Bearings installed.
  • 2 dust covers.
  • Spacer tube.
  • CeramicSpeed Long Life Grease
  • Sticker Sheet.

 

Bottom Bracket tool for installation: BBT-47 (not included)